CONTROL-V31

RGB/RGBW Controller (compatible with dual colour (tuneable white) and single colour). JISO SMART CONTROL

Control: RF 2.4GHz or PUSH Switch

Input Voltage: 12-36Vdc

Output Voltage: 12-36Vdc

Output Current: 4 Channels / 5A (per channel)

Size: L175 x W45 x H27 mm

Distance: 30m

Working Temperature: -30° C ~ +55° C

(JISO recommends to use it with its 24V LED Strips and 24V Power Supply Units)

- Smooth dimming and switch without any flickering.

- Can connect with external PUSH switch to achieve ON/Off and scene change function (consult instruction manual).

- Each controller can accept up to 10 remote control (included wall panel remote).

- Can also be used as a dual colour or single colour dimming controller, good compatibility.

- Auto-transmitting function, one controller can transmit the signal from the remote to another controller within 15m, so the remote control distance can be beyond 100m.

- Auto-synchronization function, different receivers can work synchronously when they are controlled by the same remote, under same dynamic mode and same speed.

- Can be WiFi controlled by APP installed on IOS or Android mobile devices while working with WiFi-Relay controller.

- Please take into account the current output to define the length of the LED Strip and its power.

(máx. 10m continuously, each LED Strip, due to voltage drop and overheating; if it is  necessary more than 10m please design two LED Strip symmetric; E.g.: If 15m then separate in 7.5m + 7.5m).

 ____________________________________________________________________________________________________________________________________